Foam Dressing Specification
|
Foam dressing |
|
|
Material |
1) Single layer: PU foam, thickness 5mm±0.8mm 2. PU Foam dressing 1) Surface: PU film, skin color, thickness ≥ 0.015mm 2) Sub-layer: pressure-sensitive adhesive, Adhesive≥15gm/ sq.M 3) Third-surface: PU foam, thickness 5mm±0.8mm 3. Foam dressing (self- adhesive) 1) Surface: PU film, skin color, thickness ≥ 0.015mm 2) Sub-surface: hydrocolloid, thickness ≥ 0.35mm 3) Third-surface: PU foam, thickness 3mm±0.8mm 4) Back: Galassin paper, paper≥80gm/ sq.M |
|
Photo |
|
|
Size |
5 cm × 5 cm 10 cm × 10 cm 15 cm × 15 cm 15 cm × 20 cm 20 cm × 20 cm 15 cm × 20 cm |
|
Uses |
Foam dressing is a kind of new dressing made of foaming medical polyurethane which contains CMC. 1. It is adaptable to different phases of wound, especially to heavy exudated wounds. 2. 1-l degree burn and scald wound. 3. For bum and scald wound, consmetic operation and shin-donor sites. 4. Ulcer, bedsore, pressure ulcers and cavity wound. 5. Post-operation surgery wounds and injuries. 6. Silver ion foam dressing is especially used for infected wounds with heavy exudates. |
|
IFU |
To apply a foam dressing, first clean the wound and surrounding skin, then select a foam dressing that is slightly larger than the wound. If necessary, cut the foam dressing to fit the wound shape and apply the smooth side to the wound. Secure the dressing with gauze or other bandages, or tape if the dressing has sticky edges. Change the dressing as needed, usually when exudate approaches the edges, after 7 days, or if the wound changes significantly. |
Precautions |
1. Make sure the wound area is clean and dry before using dressing. 2. Foam dressing should be 2cm bigger than the wound. 3. When the exudates is 2cm close the foam dressing edge, the foam dressing should be changed. 4. It can be used together with other dressings. |